+86-0752-5763368  info@texlinkco.com

BLOG

Mold silicone maintenance method

  • Phone: +86-13431880534
  • Tel: +86-0752-5763368
  • Email: info@texlinkco.com

Silicone mold is a kind of mold made of food-grade silicone, which can be used to bake cakes, pizza, bread, mousse, pudding, chocolate and scheduling food. The silicone molds can be made into different shapes, such as animal shapes, and can be ordered in different colors, which is both beautiful and practical. We should be able to maintain the mold silica gel, and the following servo share a few mold silica gel maintenance methods.
1 mold silicone after each use, with hot water (diluted edible cleaning agent) or in the dishwasher to clean, please do not use abrasive cleaning agents or foam cleaning, to ensure that the mold in each use and storage have been dry before.
2. When baking, silicone cups should be placed separately and flat on the baking sheet. Do not dry bake the molds, for example, for a 6-link mold, if only 3 molds are used, the other 3 molds must also be filled with water. Otherwise, the mold will be baked badly and the life of the mold will be reduced. Before baking, you can spray a few silicone cups with anti-stick baking oil.
3. When the baking is finished, remove the entire baking tray from the oven and place the baked goods on a cooling rack until cool.
4. Silicone cups can only be used in ovens, toaster ovens, microwave ovens, and are not allowed to be used directly on gas, open flame or electricity, or directly above the heating plate or under the grill.
5. Please do not use knives or other sharp tools on silicone products, and prevent heavy pressure, pulling.
Mold silicone manufacturers