+86-0752-5763368  info@texlinkco.com

SILICONE KITCHENWARE

Customized round hockey ball silicone mould

  • Phone: +86-13431880534
  • Tel: +86-0752-5763368
  • Email: info@texlinkco.com

Silicone ice ball molds are often used in summer silicone products, why ice ball molds to choose silicone, because silicone has a safe and non-toxic, soft and comfortable, environmentally friendly and durable advantages, silicone ice ball molds are also very diverse, there is a single cell ice ball, there are double, 4, 6, 8 cells vary, silicone ice ball can do 8 ice balls at a time, can meet more than one person at the same time, so custom silicone 8 cell Ice ball will be more, so silicone 8 grid ice ball custom products do you know?
Silicone Ice Ball Mould

Silicone ice ball features.
1, using food-grade silicone material. Products are in line with FDA, safety certification standards. Baby pacifier material, safe and environmentally friendly, non-toxic and tasteless
2, has a longer service life than other materials.
3, a variety of colors to choose from. Can be deployed according to customer needs of different gorgeous colors.
4、Easy to clean and handle.
5、Super stretchable, soft texture, can be repeatedly rubbed, suitable for long-term recycling! Silicone material is soft, easy and convenient to demould.
6, no fading, no mold, no blackening, no embrittlement, anti-aging, high coefficient of pulling gentleness longer service life than other materials.
7, the bottom plane design, placed smoothly, not easy to shake
8, with a small funnel to fill the water more convenient and fast
9, layered design, gently open the upper hemisphere can be, easy to take ice, simple demoulding!
Silicone Ice Ball Mould
Notes on the use of silicone ice balls.
1, before use need to be washed with water and then put in hot water to disinfect, then add pure water in the ice making mold, put it in the refrigerator, take it out when you need to use it, then put it into the drink. After use, it should be washed and stored in a clean and dry place and away from direct sunlight. Silicone products should not be exposed to open flame and the surface of the mold should not be scraped with sharp knives.
2、In case of solidification during the process of making ice balls, the liquid can be reheated and melted and re-made.
3, when making the whole sphere of the ice grid, you can add some water above the mold will also press the mold tightly, so that the made ice ball is relatively round.
4, the production of ice balls can be served with syrup, soybean powder, crushed peanuts, etc., together with the taste is very good.